Krah pipe production line - China Qingdao Xindacheng Plastic Machinery

Krah pipe production line

krah pipe production line, Also known as the Large Caliber PE Winding Structural Wall Pipe Production Line.

مشخصات محصول

 پارامتر های فنی:

مدل لوله (میلی متر) سرعت (m / min) و مجموع قدرت (KW)
XDC / KRPE-2000 φ200-φ2000 .35 320
XDC / KRPE-3000 φ300-φ3000 .30 460
XDC / KRPE-4000 φ1500-φ4000 .15 660

After adding glass fiber to Krah-pipe:

NO. Diameter Enclosure thickness (mm) Ring stiffness  Stiffness increase ratio Remarks
Pure raw material Glass fiber raw material
1 DN800 5 5.18 8.13 56.9% the same weight
2 DN1000 5 8.7 13.65 56.9% the same weight
3 DN1500 5 8.24 / / /
6 4.72 8.08 71.2% the same weight

توضیحات محصول:

این واحد معمولا به عنوان لوله krah در چین شناخته شده است، و آن طول می کشد پلی اتیلن با چگالی بالا (HDPE) رزین به عنوان مواد اصلی توسط گرم فرآیند قالب گیری پیچ در پیچ. این است که به سیم پیچ ساختاری لوله دیوار B با قابلیت ضد فشار قوی، و با پلی پروپیلن (PP) پشتیبانی تک جداره لوله راه راه. لوله دارای سطوح صاف داخل و دایره تقویت ساختار خارج، و همچنین دارای استحکام دایره بالا، مقاومت به ضربه قوی و ذوب آب بندی مشترک. آن را به لوله انعطاف پذیر میباشد.

1. Reduce melt pressure and energy consumption.The extruder platform car and winding platform adopt the precise line guide, three-dimensional movement and using servo motor control.

2. Patented technology for four extruders co-extrusion technology.

3. Choose different assignments according to raw material property and color, etc.

4. Improve the pipe strength

5. Cut down the cost

Various parts of the production line:

1. Optimized extruder placement and flow design.

2. Reduce melt pressure and energy consumption.

3. The extruder platform car and winding platform adopt the precise straight line guide, three dimensional and controlled by servo.

4. Patented technology for extruders co-extrusion technology.

5. Choose different assignments according to raw material property and color, etc.

6. Can be adding glass fiber for increasing pipe sriffness and reduce pipe cost.

7. Advanced PLC control system:

The whole line can be inergarated into the control system, not only controllde by linkage control but alse by individual control.

Programmatically control and monitor tuhe working condition, automatic correction of equipment operation and peotection.

8. Cooling cutting:

The cooling cutting adopts single-position design for cooling the product.

Trim along the socket.

Pneumatic cantilever control, exact dimension and high efficiency.

9. Demoulding device:

Advanced structural design and high reliability.

High degree of automation.

Effectively protect the mold and reduce the labor intensity.

Auxiliary equipment:

1. Dressing device:

The horizontal walking hydraulic lift will transfer the pipe after demoulding from hosting rack to the dresser and repair the pipe socket to meet the requirements of the exterrior quality of the pipe. Moreover, the electric fuse is embedded in the socket, Finally inspect and weigh the pipe.

2. PP corrugated pipe production line:

Dual module design;

Unique designed cooling system, high speed of production;

High efficiency.

3. Forming mould:

Diameter range: ∮200-4000mm;

Steel structure welded frame, easy operation;

Special steel production, long life and smooth demoulding.

4. Winding system:

Adopt full mechanical mode;

Convenient maintenance, strong reliability and tidy layout.

Four co-extrusion schematic:

Pipe wall structure:


زمینه کاربرد:

1. Underground drainage, sewage, aeration and others in municipal construction areas;

2. Drainage for railway, highway, court and others in road engineering areas;

3. Nuclear power plants, steel mills, power plants, petrochemical plants, docks, stations;

4. Tidal flat, saline pool, riverbed, soft foundation expansive soil, earthquake zone and others in adverse environmental areas.

krah tube mould / krah pipe mold:

krah pipe production line 2

  • قبلی:
  • بعدی:

  • محصولات مرتبط

      WhatsApp Online Chat !